DC Air Conditioner Working Principle

 In recent years, DC air conditioners have become increasingly popular due to their many advantages over conventional air conditioners. Since the compressor consumes the most power of any air conditioning system, changes in compressor technology have made it possible to deploy better and more efficient air conditioners or heat pumps.

DC Air Conditioner Working Principle

AC Induction Motors

In a three-phase AC induction motor, the windings of the motor stator are designed to produce a rotating magnetic field when a three-phase AC voltage is applied to the windings.

The rotor usually has a winding embedded in an iron laminate. When power is applied to the windings, a magnetic field is generated in the rotor, causing it to react with the magnetic field in the stator.

The rotating magnetic field of the stator pulls the rotor, which tries to keep up with the rotating field. The lag or slip is about a few percent. This design is one of the traditional ways to drive a three-phase motor in a compressor.

 

DC Brushless Motors

In a DC brushless motor used in a DC inverter air conditioner or heat pump, the motor rotor consists of permanent magnets and the stator has windings on it.

Compared to typical DC motors, there are no brushes and commutators, thus eliminating problems such as sparking, brush life, brush residue and electrical noise. The motor's windings are connected to a power electronic control that determines the motor's speed through the use of a microcontroller.

Various protection and monitoring circuits are built into the electronic control to ensure efficiency and reliability. Due to its better reliability and energy efficiency, this type of motor is being used in more designs.

As a result, the main advantages of DC brushless motor compressors are quiet operation, compactness, longer life, energy efficiency and better capacity control, resulting in a more comfortable environment for the people using the equipment. Its use is no longer limited to air conditioning equipment, but can also be used in refrigerators, washing machines, pumps and fans.

 

DC Air Conditioner Working Principle

DLCP24-18Y3A DC ELECTRIC AIR COMPRESSOR

 

DC Inverter Control Circuit

The electronic control is the most complex part of the DC inverter system, thus making it one of the most expensive parts of the air conditioner, the other part being the compressor.

The control circuit of a DC compressor consists of the following.

Part 1, the DC converter

The DC converter uses four diodes connected like a bridge to convert the input power from AC to DC. Inductors and capacitors are connected before the converter to reduce the electrical noise introduced into the power supply due to the switching of the transistors.

Part 2, PFC or Power Factor Correction

Being an active power converter means that the power factor correction of this design is able to correct the power factor of the device to over 98% compared to other LC (inductor and capacitor) filter based solutions.

Part 3, IGBT Transistor Inverter

This section generates the 3-phase voltage supply for the DC compressor motor. The compressor's brushless DC motor will receive a voltage close to the 3-phase sinusoidal voltage that turns the motor on. The speed of the motor can be controlled from low to high by changing the power supplied to the motor through the switching of the transistors. When immediate cooling or heating is required, the motor will turn at the highest speed. When the room temperature stabilizes, the motor will rotate at a lower speed.

 

GuangDong Topleader produces air conditioners for trucks and vehicles, please feel free to contact us if you need.

评论

发表评论

此博客中的热门博文

Non Woven Fabric Wallpaper - Tianjinsheng

图片
  Non-woven wallpaper  has been a popular product on the wallpaper market since the 1990s. The compacted mixture of cellulose and polyester fibers provides very good dimensional stability and is highly resistant to mold and mildew growth.   Blends of cellulose and polyester fibers Blends of cellulose and polyester fibers, i.e. natural and synthetic fibers, are called "nonwoven materials". This revolutionary wallpaper material was introduced to the market in the early 1990s. Pulp or cellulose is obtained from chemically treated plant fibers. Polyester is a synthetic fiber that is very important in the textile industry.   Dimensional stability due to compaction In the production of nonwoven wallpapers, natural and synthetic fibers are compacted together with a binder, resulting in very good dimensional stability. The two types of fibers are fused together to form a tear-resistant, stable unit that is still breathable. The compaction process also ensures that individual...
阅读全文

5 Tips for Protecting Pipe Threads

图片
  1. What Do Pipe Threads Need Protection From? When connecting any section of pipe to another, thread engagement will determine the strength and seal quality of the string. The thread profile and pipe specification will determine the axial loading that a specific section can handle. To ensure every connection works optimally, pipe thread protectors   can reduce the risk of a compromised thread profile.   The types of elements that pipe threads need protection from include:   • Corrosion and rust when exposed to the elements   • Debris and moisture   • Contaminants that could reduce the quality of the extracted fluids   • Damages like scratches, dents, cracks, and dings   Corrosion particularly presents a problem for operators, as it may not be easily visible before installation. Contaminants and moisture in the thread may increase the speed of oxidation, leading to a compromised thread profile. Any damaged thread will likely also accelerate the c...
阅读全文

How to Choose the Thrust Stand?

图片
In the past years since we started selling our  drone test stand  technology, we've learned a lot of lessons through trial and error.  If you are familiar with our products, then you know that our  test thrust stands ​ combine thrust and torque measurements with voltage and current to derive the system’s power and efficiency. Perhaps the most obvious concept for such a tool, and the cheapest to build, is a system involving bearings or bushings. What we've learned, however, is that using bearings and bushings has a number of disadvantages: 1. Bearings and bushings cause friction. The random friction error causes significant uncertainty in the measurement (anywhere from 2 to 20% of the measured force). Even if the design looks rigid, there are micro deformations and movements in the system.  2. This leads to hysteresis in the force measurement: the force measured is dependent on the previous force applied. Because of the random nature of fricti...
阅读全文